Insulation Takeoff Software for Batts, Blown-In and Spray Foam
Measure walls, attics and rim joists from the plans and convert area into bundles, bags or board feet at the R-value you install.
What you measure
Exterior walls
Trace exterior walls; set height in the conversion to get wall area.
Attics & ceilings (SF)
Measure attic floor and vaulted ceilings with a slope angle.
Rim joists (LF)
Trace rim and band joists for spray foam or board.
Basement & crawl walls
Measure foundation walls for rigid board or foam.
How a job runs
- Step 1
Upload the plans or energy model drawings.
- Step 2
Trace walls, attics and rims by assembly.
- Step 3
Convert area into bundles, bags or board feet.
- Step 4
Quote it and schedule the crew.
What you price
Why insulation businesses switch
Insulation quotes are often worked out on paper from the energy model. TrueScope measures the plan and does the bundle, bag and board-foot conversion for you.
Setup tip
There is no depth tool yet, so set thickness in the conversion: 2 in closed-cell foam is 1 SF = 2 board feet.
Common questions
Yes. Set the board feet per square foot for the thickness on the foam product and the takeoff totals board feet.
Yes. Give the group a slope angle and the area is calculated on the slope.
Try Takeoffs on your next insulation job.
30-day free trial · no credit card · every module included